Acrylic is also known as Plexiglas ®, PMMA or under many other commercial names. Acrylic is light, rigid and UV resistant, which makes it ideal for support or letters. As the customers needs varies (see-through the material, only see the light through the material, do not see-through at all), Gravotech offers different Acrylics: transparent uncolored, translucent colored, opaque colored, and opaque frozen.
There are 2 kinds of Acrylic:
As good quality extruded acrylic can be found in large quantities at PMMA distributors, Gravotech's material offer focuses on continuous cast acrylic, that will offer an added value to your customers. Of course, both our rotary and laser acrylic engraving machines can process all kinds of acrylics.
To create displays, indoor or external signage, crafts, advertisement items, trophies and awards, models, acrylic cutting machines are ideal. Gravostyle™ software can create folding area or hinges so the laser can process the acrylic in a way that it can be bent.
With Gravostyle™ and its embedded preset parameters, you can cut, fold and weld any thin acrylic (less than 5mm thick) with the same laser. When it comes to cutting only, our CO2 laser engravers can reach a depth of 25mm (1 inch).
The maximum width is directly linked to the laser source power, even if speed plays a role. Rule of a thumb: count approximately 5W per mm of thickness, i.e a 40W CO2 laser can cut an 8mm thick acrylic sheet.
Our lasers can produce a finishing glossy polished edge on acrylic when cut, thanks to Gravostyle™ software that adapts speed and power of the laser. The acrylic melts instantly when the laser beam hits the area, and then hardens immediately when not. It results in a smooth melted surface state on the edge, transparent and polished, which is welcomed in the signage market.
The main advantage is that manual polishing is not necessary, the product is ready when it comes out of the laser. We recommend a wide lens (up to 4’’) for a better finishing result (as the edge will be straighter).
Add colors to the acrylic support with a UV printer as this material is perfect for that. Use the Print & Cut mode to automate the cutting with the laser by using the same electronic file you previously used in the printer.
For outdoor signage, we recommend cutting a transparent acrylic sheet of the same shape than the printed one, and to stick it above. This way, you will ensure long-lasting colors as you will protect the ink from external UV and elements that normally whitens it.
Our rotary engraving tools can cut or drill up to 25mm. Gravostyle™ software allows to do a lateral finishing pass and obtain a neat frozen finish on the edges.
Percut range is made for productivity and endurance of rotary engravers: short tools for machining using a high frequency or collet spindle.
Gravostyle™ CAM function allows to calculate a 2D or 3D tool path and realize flat 3D signages with any rotary machine.
This result can’t be obtained with current laser technologies on the market. Moreover, the bottom can be transparent with a ball cutter and an overlap of 0.05mm (or less).
Rotary technology does not represent any risk of fire. Acrylic is a very flammable material when used with a laser, therefore the laser needs to be watched at all time, whereas rotary engravers can work with a very limited monitoring.
The user can work on other tasks, creating a time and cost reduction. Moreover, lasers for acrylic need an air extractor with filters to change whereas rotary needs a chip collector (cheaper than air extractor), not filter necessary.
For your transparent outdoor signage, choose acrylic. It is a resistant material to smudges, fingerprints, and scratches and can be used on both the front and the back.
Discover the cast version of acrylic for a modern yet resistant finish.
Created for engraving professionals, Gravoglas 1 is particularly popular for the brilliance of its black, gold and silver colors. Gravoglas 1 is excellent exterior usage.
Reverse engraving using a cutter brings depth and volume to your creation. Gravoglas 1 can also be engraved and cut using lasers.
Its matte finish guarantees ADA compliant results and great look.
Create beautiful Braille and tactile signs with Gravotac™!
From small trophies to large signs, Gravotech offers a wide range of lasers machines to match every Acrylic cutting need. By providing small Acrylic laser cutting machines and also CO2 laser engravers, Gravotech has solutions are ideal for everyone.
WeLase is a compact laser marking station for jewelry engraving, personalizing objects, cutlery, gifts, and perfumes....
The LS100EX CO2 laser machine is a medium-sized machine for engraving and cutting. Its engraving area matches the size of ¼ sheet, making it the ideal sign making machine....
The LS100 is an easy to operate and compact laser engraver to cut and mark a wide range of materials....
The LS900 industrial laser engraver, Co2, Fiber, or Edge (dual sources), are ideal for high speed marking and cutting of medium and large format media.
...Numerous innovative functions and features are combined into the LS1000XP, turning it into the ultimate engraving and cutting laser for intensive production.
...Our Rotary large tables are ideal for productive Acrylic cutting as they can run 24 hours per day with only one operation to load and unload between each batch production.
Unique in the market, this industrial engraver is perfect for signage, labelling, light milling and identification of parts....
Fast, powerful, and precise: discover a machine unique in the market. The ISx000 range is designed for large format jobs to batch engraving and cutting.
...The best-selling rotary engraver, the M20 is a small engraving machine for all applications with plastics, metals and even glass....
This industrial engraving machine has been a classic for more than 15 years for small part traceability, label and small signage engraving....
The M40 is a compact versatile signage engraving machine. Its large engraving area makes it a perfect engraving solution for medium-sized and flat objects....
Gravostyle ™is the software dedicated to job creation, up to 3D possibilities and Matrix mode to repeat a pattern on large sheets. Moreover, it drives both Rotary and lasers machines.