Gravotech  dot peen marking machine marking a Datamatrix code

IMPACT

DOT PEEN STATION
IMPACT, benchtop dot peen marking station.
Standalone metal engraving machine, the Impact is easy to configure and master. Benefit from our 40 years of experience in dot-peen and traceability to take your business, whatever size and expertise, to the next level.
  • Touch & Mark
    The large colour touchscreen and onboard control software make training a thing of the past. The intuitive system allows you to start marking text, logos and 2D codes straight away. From serialisation, automatic timestamping, counters, duplication control, marking preview, link to a database and marking history the all in one system makes the operator’s life easy and does not require a computer or complicated setup.
     
  • I-Sense
    With the motorised Z-axis, it has never been so easy to adjust the Z-axis on the Impact dot peen marking machine. The I-Sense function (Impact eZ m) detects the surface of the workpiece, automatically adjusts the height of the Z-axis and starts marking with no intervention on the part of the operator. Several adjustment modes are available: automatic mode (I-Sense), programmable mode and normal mode, which allows manual adjustment by means of buttons located on the side of the machine.
     
  • Dynamic Dot Control
    Creating a perfect result every time the IMPACT features DDC™ (Dynamic Dot Control) (Impact m and eZ m) technology which enables automatic adjustment of point density according to the required size and depth of marking. Because of this, your markings are high quality and with high visibility, irrespective of your application. Two adjustment modes available: automatic and manual.

Technical Specifications

Available in two power sources
Pneumatic (p) - Requiring compressed air
Electromagnetic (m) - Electric version

Available with manual or motorized Z-axis
Pneumatic (eZ p) and Electromagnetic (eZ m)

Multiple stylus available for all your marking environments

Accessories available

  • Rotary devices
  • Automatic plate feeders

Support USB barcode and 2D code readers for the read-and-mark-and-check process.

File transfer via USB stick or network connection (FTP)

The markings comply with international standards
Data Matrix™ ECC200, GS1 Datamatrix, 5x7 font, DT05-89, JES 131, ATA Spec 2000, UID, SAE AS9132, NASA-STD-6002, MIL-STD-130, ISO/TS 16949, AIAG B-17, AIAG B-4, ISO/IEC 16022, AIM-DPM etc.

General

Technologies
Pneumatic
Electromagnetic

Software
Integrated traceability software with colour touchscreen

Marking Capacity

Marking area
100 mm (3.937 in) x 120 mm (4.724 in)

Z axis stroke
300 mm (13 in)

Z axis type
m & p: Manual
eZ m & eZ p: Motorized & programmable

Impact p Impact m Impact eZ p Impact eZ m
Model

Impact p

Impact m

Impact eZ p

Impact eZ m

Technology

Pneumatic

Electromagnetic

Pneumatic

Electromagnetic

Dimensions (L x W x H)

490 mm (19.291 in) x 270 mm (10.630 in) x 704 mm (27.716 in)

431 mm (16.968 in) x 270 mm (10.630 in) x 704 mm (27.716 in)

509 mm (20.039 in) x 277 mm (10.905 in) x 637 mm (25.079 in)

490 mm (19.291 in) x 270 mm (10.630 in) x 704 mm (27.716 in)

Marking area

100 mm (3.937 in) x 120 mm (4.724 in)

100 mm (3.937 in) x 120 mm (4.724 in)

100 mm (3.937 in) x 120 mm (4.724 in)

100 mm (3.937 in) x 120 mm (4.724 in)

Machine weight

26 kg (57.32 lbs)

26.5 kg (58.422 lb)

26 kg (57.32 lbs)

26.5 kg (58.422 lb)

Communication Interfaces

RJ45, USB(x2), RS232, Process IOs

RJ45, USB(x2), RS232, Process IOs

RJ45, USB(x2), RS232, Process IOs

RJ45, USB(x2), RS232, Process IOs

Embedded fonts

10

10

10

10

Display

7" color touchscreen

7" color touchscreen

7" color touchscreen

7" color touchscreen

Z Axis type

Manual, 300 mm (11.811 in)

Manual, 300 mm (11.811 in)

Motorized, 300 mm (11.811 in)

Motorized, 300 mm (11.811 in)

2D Codes

Datamatrix, QR Codes

Datamatrix, QR Codes

Datamatrix, QR Codes

Datamatrix, QR Codes

Rated power comsumption

130 VA

130 VA

130 VA

130 VA

Input voltage

130 VA

100 - 240 V AC

100 - 240 V AC

100 - 240 V AC

Compressed air supply

2 - 6 Bar

6 Bar

Rotary Device (option)

RD1, RD2

RD1, RD2

RD1, RD2

RD1, RD2

Languages available

19

19

19

19

Operating temperature

5° to 45° (41 to 113 F)

5° to 45° (41 to 113 F)

5° to 45° (41 to 113 F)

5° to 45° (41 to 113 F)

Plastic Identification

The IMPACT range makes it possible to perform precise and high-quality marking on a large number of materials from, metal plate engraving (steel and painted steel, aluminum, brass, iron, steel, raw and anodized aluminum) to plastics (ABS, PA, PP).

Impact Z axis ideal for small and large parts

From single part markings to small batches the IMPACT is loved for it size and versatility. With a 300mm clearance and open architecture traceability on, one of the smallest parts to identification on larger heavier parts are available. No job is too big. Used from automotive, aerospace, medical, and from heavy and light industries, the Impact has become a favorite workstation.

The marking head is raised or lowered using control buttons

We took all of our experience working within industrial traceability and created the IMPACT a need, where both the marking requirements and the parts to be marked, are constantly changing. The IMPACT was created to be the all in one, ready to go solution, with usability at the forefront and designed to be opened and ready to start marking immediately.

This dot peen marking machine can handle more than 25 materials

DOT PEEN
ORGANICS
Wood, varnished wood
PLASTICS
ABS​​
PA
PC
PE, BET
PMMA, Acrylic
POM - PBT
PP
METAL
Aluminum
Anodized Aluminum​​
Brass​​
Carbide
Coated metal
Copper
Gold, silver, nickel, platinum
Stainless steel​​
Steel
Titanium
= Marking / Etching

Associated products

IMPACT: modern machine, historical robustness

Technifor started to manufacture benchtop dot peen machines 40 years ago

 

Our historical brand Technifor invented dot peen, a new marking technology, only four years after being founded in 1985. The CN machine range was quickly launched following the dot peen invention. These standalone marking machine allowed busy workshops and part manufacturers to easily identify all kinds of small to medium-sized industrial items.

In 2008 Technifor released the XF500 standalone marking machine which inherited from the robust mechanics of the dot-peen “CN” range.

Designed for worshops, this stand-alone marking solution has enabled parts manufacturers to easily identify all kinds of small and medium-sized industrial parts.

At the same time, Propen, a distribution brand of the Gravotech Group, developed the worldwide famous P5000 standalone engraver. When Technifor and Propen joined forces in 2018, the XF500 and P5000 evolved into the IMPACT standalone engraver, a modern, industrial, and robust marking machine, field-proven for the industry.

IMPACT - Technifor